Our shop will reopen on Friday 3rd July 2020 at 10am. Because it’s a relatively small area, we can only welcome our visitors one household at a time, maximum two adults (kids obviously welcome, but if you’re The Waltons, you may need to take it in turns!)
We will have hand sanitiser at the door, and more at the counter. In order to save us from having to clean down all handled stock, and to allow you to browse and pick up at your leisure, please make use of the hand sanitiser before entry. We have really nice stuff that, once the initial burst of alcohol has gone, leaves a lovely scent and has Aloe Vera in so it won’t dry out your hands!
The First Minister has announced that it will be mandatory to wear face coverings in shops from 10th July. We would appreciate it, if you have one with you, to wear it from tomorrow when in the shop. Mo and Kath will wear visors when at the counter.
We have invested in dedicated ‘Point of Sale’ equipment, with contactless payment or a stylus to input your PIN on screen so you don’t have to handle anything (stylus will be sanitised between customers). We would prefer not to handle cash at this time, but if this is your only option, of course we will accommodate you.
We hope you’ll appreciate that we have taken every possible step to protect both our staff and our customers, and we thank you for your co-operation in following the guidelines.
Tullybannocher Cafe has a fabulous new Takeaway window operational now, and the Garden Centre and Gift Shop are open too, so there’s plenty to do while you’re here.
We look forward to welcoming you back to MoKa Pottery soon.
We will be swapping clay for cotton and making masks from this week.
The masks are double-layer 100% cotton, with a pocket for an optional filter, and a nice snug wire nose fitting (tested by both of us, great for avoiding steamy spectacles) which keeps the mask close to your face. They are washable.
PLEASE NOTE: these are NOT medical grade masks. They are for personal use in line with the Scottish Government recommendation to wear masks in shops and smaller spaces where it is harder to maintain a full 2m distance from others. We make no claims on the efficacy of our masks, other than to confirm that we are using them ourselves and feel they are of a decent quality. Please see our note below on the filters.
Our test masks have filters inserted and are still fairly comfortable for breathing and don’t feel too stuffy. I did a ‘test drive‘ during a 5 and a half hour day of errands this week. With over 3 hours of actual mask-wearing in shops, etc, it was still pretty comfortable, if a wee bit warm.
We have disposable filters to go inside the masks, available separately. We have now run out of the charcoal impregnated PM2.5 filters, but have Nonwoven Meltblown Filter Fabric that we will be supplying as double thickness filters.
Here’s a great video explaining the benefits (and limitations) of hand-made masks. Worth a watch.
Our Meltblown filters have an element of particle filtration and are useful for trapping moisture and droplets. To my knowledge, the filtration is not fine enough to capture Coronavirus particles and we make no such claims, but based on some basic internet research, it should serve some purpose for droplet-borne particles.
Masks are £8 each. Filters are an additional 50p per filter. Shipping in the UK for up to 3 masks is £1.20. 4-6 masks is £1.70 and 7-12 masks is £2.20.
If you order early enough, you can choose your fabric for the outside of your mask. We’ll be working to order first, then making in random fabric combinations. Fabric choices are numbered in the images. Please note we may have to ask you to choose alternate colours if first choices are finished.
We spent some time filming the unboxing and setting up of our new Peter Pugger VPM-7 Deairing Mixer Pugmill, and you can now view this below or on our Youtube channel. Please do click LIKE on the video, SUBSCRIBE to our youtube channel and share our video to help us build our audience. Enjoy the video.
We will be uploading the next in the series shortly – with the first use of the mixer/pugmill and then another with the use of the extrusion dies, so be sure to check back for these.
Last year, we finally invested in a pottery studio tool we have wanted for quite some time (about 12 years, truth be told); a vacuum de-airing mixer pugmill. But not just any make or model of pugmill would do. We wanted a Peter Pugger, which has quite a hefty price tag, so it had to wait in favour of other necessities (like food, rent, clay, a bigger kiln, etc). We had drooled over adverts in glossy pottery magazines for most of the last decade and beyond, and had decided on the smallest VPM-9 model and watched every available video on YouTube for this particular machine.
So, when we finally had an unexpected windfall last year, we knew exactly what to get (after we bought our big kiln, that is). When I checked the website of the UK distributor to order (www.scarva.com) I discovered there was a newer, smaller, model now available – the VPM-7 – designed specifically for smaller scale single-potter studios. Knowing that once our backlog (possibly 10 years or more) of clay reclaim was processed, we wouldn’t need anything too big, we opted for the smaller size and used the difference in cost to treat ourselves to a few optional extras.
We added the pug cutter attachment because, having worked for a small-scale clay manufacturer and spent many hours a day processing and cutting pugs of clay, I KNEW it was worth the time it would save in searching for a cut-off wire that had disappeared down the back of the pugmill station for the tenth time in an hour.
We also ordered three die attachments for extruding. One is for a set of various sized coils. Any of my previous handbuilding students will tell you, I hate rolling coils (mainly because, I’m the first to admit, I’m a bit rubbish at it) but I do find coil building to be a really meditative and enjoyable practice and I can achieve shapes I just can’t get with slab building or pinch pots. I’m really looking forward to experimenting with bigger coil pots.
The second extruder die attachment is for handles. The die has an assortment of handle shapes, as well as some small coil shapes, including hexagon and oval, and I’m interested to try them, but I will need to make a blanking plate to cover the ones I don’t want, unless I want to be continually feeding unwanted extrusions back into the hopper. I have been saving some containers with decent sized metal bases (coffee mate tins are ideal) so I think the blanking plate should be fairly achievable, with my limited DIY skills.
The third is a set of dies and inserts for hollow cylinders. I’m particularly looking forward to trying these, as I have a number of ideas I want to play with. Their only limitation is the size of the Peter Pugger nozzle, which is 7.5cm (3” ) in diameter. This means I can only make smaller items, although I am hoping to purchase an extruder later in the year with an expansion box for larger output, to make bigger pieces in a new line of work. For now, the smaller form will not only allow me to make smaller maquettes of the first of these planned new pieces, but also can help with another exciting new project we are working on.
But I digress, so now, back to the Peter Pugger purchase. Although you can select your model and all accessories on the Scarva website, you don’t actually complete and pay for your order immediately. This is to make sure that Scarva can check that you are aware that the machines are built to order, in the USA, and that you understand there is a fairly long lead time. So they called, we chatted, I confirmed I understood about the wait, and gave them my card details. We placed our order in February and had email confirmation from Scarva that it had arrived in the country at the end of May. It was delivered to us within a week or so and, yes, it has been sitting IN THE BOX in our workshop for the last 8 months because… life happens.
And now here we are in February, almost a year from our original order. We finally got the space cleared and prepped for our new baby in January but once we saw everything out of the box, Mo had the brainwave to do an unboxing video for YouTube. When I was pining all those years to own one, I was disappointed with how little online content there is featuring this wee gem. So we came up with the idea to not only do an unboxing but also a ‘first setup’ video, and then a ‘first mixing’ video, and then a ‘first pugging’ video, and then, because some of the extras we purchased included extruder dies, a ‘first extruding’ video. And of course, I’m such an experienced vlogger (I’m really not) so this would be a cinch, right? I don’t believe in doing things by halves, ask anyone who even remotely knows me!
So, this post is the first of a series featuring our Peter Pugger VPM-7 Deairing Mixer Pugmill. We thought about naming him, as we have with our three kilns (Angelica, Eliza and Peggy, if you’re interested), but since he actually comes with a name, he’s probably going to be keeping that one. I don’t think I’m going to win the argument for calling him Alexander. (Give yourself a big gold star if you recognise our naming convention and can guess what the name of our future Extruder would be.)
We haven’t started the filming yet, but here is a still shot of his new home. Check back soon for the rest of the series, including video, if it works!
We are delighted to be joining the lovely people at Perthshire Creates for their Christmas Design Market this Sunday, 24th November 2019, at the Civic Hall in Perth (2 High Street, Perth, PH1 5PH) from 10.00am till 4.30pm.
With a fantastic array of the best of handmade in Perthshire, there’s plenty to see and lots of lovely Artisan gifts for Christmas presents.
It’s that time of year again! Creative Studios all over Perthshire and Kinross-shire are opening their doors to the public.
And, because we are mid-move, you get not one, but two venues from MoKa Pottery this year. We have our shop fully stocked – at our home for the last five years – at historic Cultybraggan Camp.
Our weekend “Make A Mug” workshops that were a big hit last year will be held at our new studio premises at Tullybannocher. We are located in the grounds of the garden centre, and there is a cafe on site as well as a lovely gift shop, so it’s well worth a visit.
We hope you will pop in and see us. We are open at Cultybraggan every day during the Open Studios period, from 10am to 5pm and we have Make A Mug workshops scheduled for 12 noon and 3pm (lasting approx 2 hours each) on both Saturdays and Sundays during Open Studios.
Make a Mug Workshop sessions are limited to four places, so do please book in advance to secure your spot. Normal price is £30 but we have a POS Special price of £25 per person, £45 for two people booking together.
We have some other great offers at Cultybraggan because of the move, so pop in and grab something special for your home, or a gift for someone else, this week.